Step 10
418073
www.sauder.com/services
Page 14
UNFINISHED
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Push down
With the palm of your hand, tap the
DRAWER BOTTOM down into the groove.
å
Pull the DRAWER FRONT BRACKETS (9G) apart and slide them into the grooves in the DRAWER SIDES (D50 and D51).
You may need to gently tap them in with a hammer.
å
NOTE: The DRAWER FRONT BRACKETS are marked “RH” and “LH” for easy identifi cation.
å
Fasten the DRAWER FRONT (H) to the DRAWER FRONT BRACKETS (9G). Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
å
Slide the DRAWER BOTTOM (D983) into the grooves in the DRAWER SIDES (D50 and D51) and DRAWER FRONT (H).
å
Repeat this step for the other drawers.
BLACK 9/16" LARGE HEAD SCREW
(16 used in this step)
1S
D50
D983
D51
H
D50
D51
H
9G
