9
Instructions For Use
1. Remove water tank:
NOTE: The tube which transfers water from the Water Tank
to the boiler is weighed down with a brass ball. This is an
intentional design to improve efficiency of water usage. It is
normal for this ball to create a rattling sound inside the Water
Tank during use.
5. Install the Clean Water Tank:
2. Pull the cap on the Clean Water Tank to open.
3. Fill the Clean Water Tank with cold tap water
ONLY
. Close the cap
and make sure no water leaks before you refit the clean water tank.
4. Ensure the Hard Water Filter is in place before you refill the clean
water tank.
WARNING! Do not add any cleaning solution, detergent, vinegar
or bleach into the water tank. This will cause damage to the
cleaner. Do not use hot or boiling water to fill the water tank.
Only refill the water tank with cold tap water.
Filling the Clean Water Tank
WARNING! Disconnect the power plug from the power supply before filling the water
tank. Ensure that the water tank is installed securely into the cleaner before connecting
the power plug to the power supply.
Assembly & Instructions For Use
