background image

Sauber Mfg. Co. Standard Wiring Code for Trailers

Function

From ABS/ECU 

(as applicable)

7-Way SAE ABS Socket

Terminal ID / Color / Pos

7-Way SAE Socket

Terminal ID / Color / Pos

6-Way SAE Socket

Terminal ID / Color / Pos

LT

n/a

3 / Yellow / 4:00

3 / Yellow / 4:00

LT / Yellow / 4:00

RT

n/a

5 / Green / 8:00

5 / Green / 8:00

RT / Green / 7:00

Ground

White

1 / White / 12:00

1 / White / 12:00

GD / White / 2:00

Brakes

Blue

7 / Blue / Center

7 / Blue / Center

A / Blue / Center

Clearance/Tail

n/a

6 / Brown / 10:00

6 / Brown / 10:00

TM / Brown / 12:00

Stop

Red

4 / Red / 6:00

4 / Red / 6:00

S / Red / 10:00

Breakaway

n/a

n/a

Black / To Battery

Black / To Battery

Notes:
Clock positions are as viewed from male pin side
Center pin on chassis is expected to be wired hot on ABS
4-Lite systems will be wired in parallel unless otherwise noted
The Stop/Red circuit is generally run back to the rear junction box and is only used on a separated 4-lite system
If clearance and tail need to be run on separate circuit, breakaway  wire (orange) must be run outside 7/C Cable.
Breakaway may be wired directly to battery or through the 7/C cable depending on proximity to battery box.

7/C Cable - (6) 12 Gauge; (1) 10 Gauge - White
All Primary & Brake Feed Wire:  12 gauge
All Secondary Feed Wire:  14 gauge

Breakaway................................. Warner.......................... 10475 w/ Charging Circuit
Hubodometer............................. Sauber........................... 8824 w/ 10526 Hubo
Chocks....................................... Sauber........................... Model 8500-FO All Weather Wheel Chock
Lighting...................................... Truck Lite...................... LED Sealed Beam/Sealed Wiring Group      
Registration Container............... Sauber........................... 16755                
Grounding Lug........................... Sauber........................... 10481 Bronze
Winch Strap Only....................... Sauber........................... 10868  4 "x20'L w/D-Ring
Winch Binder Only..................... Sauber........................... 14147
Binder Release Ext.................... Sauber........................... 11015
Breaker Bar................................ Kinedyne....................... 10528 w/ SMC Galvanizing
Binder Hook............................... Kinedyne....................... 12955
Light Bar Junction Box............... Midland-Berg................. # 22040
Light Bar..................................... Sauber........................... Model 8840
Light Bar Binder......................... Acme Rigging................ # 2LHR-2 w/ 4' x 1.75" Strap w/ Loop
Tensioning Brake....................... Sauber........................... Model 1602-Detail Attached
Retriever.................................... Sauber........................... Model 1000 -Detail Attached

Note:  Most items listed here are in stock at Sauber Mfg. Co.

This information is the property of Sauber Mfg. Co. and is intended for customer use only.

Operation & Maintenance Manual
Model 1521-AP Combination Trailer

11/2007
Page 4

Summary of Contents for MFG 1521-AP












Reviews: