Saturn ST-MC9205, Manual, Page: 9 / 113

8
Press and hold the button for 2
seconds to start a program which starts
after a beep and the countdown of
cooking time starts.
NOTE: Countdown of cooking time in
FRY/DEEP FRY and PASTA starts when
the temperature reaches certain value
(160°C for FRY and 100°C for PASTA).
Until the temperature reaches these
values; display shows .
NOTE: There is no cooking time
countdown during the runtime of
EXPRESS display shows until
the end of the program. This program
stops automatically or when interrupted
by the User.
After the end of the program the cooker
enters into a Keep Warm mode (if Keep
Warm function is active). When Keep
Warm is active, the LED-backlight of the
KEEP WARM is active. Press and hold
to turn the Keep Warm OFF.
USER SETTINGS
The four User settings are empty cells
with minimal values of cooking settings
(cooking time - 00:00; cooking
temperature - 30°C). The user can set
and save any target values for
preparing customized dishes.
Choose one of four User settings by
turning the knob. . Press
to set the cooking time; the minute
indicator starts flashing; enter the
target value by turning knob and press
again. When the hours indicator
starts flashing, set the target value by
turning the knob and press
. When
the cooking temperature indicator starts
flashing, enter the target value by
turning the knob, then press and hold
the button for 2 seconds to start
the program with your personal
customized settings. New settings will
be stored in the memory for future use.
The user may adjust these customized
settings at any time. After the end of
the User program, the Keep Warm
function automatically starts, but can be
deactivated at any time.
FOOD TYPE SUBMENUS
The autoprograms can work with one of
four types of food groups: MEAT,
CHICKEN, FISH and VEGETABLES.
The Programs which can work with
specific food group submenus are:
FRY/DEEP FRY, SLOW STEW,
SOUP/BROTH, STEW and STEAM/BOIL.
When choosing any of these programs,
you can combine the food group setting
by pressing and turning the knob until
the desired food group icon flashes. To
select and start the program, press and
hold the button for 2 seconds.
MULTILEVEL USER PROGRAM
«SMART»
Following the four User settings is the
SMART program - a multilevel User
program. This program contains up to
nine phases with customized settings in
one cooking process. Choose SMART by
turning the knob. Digits from 1 to 9
begin flashing by the SMART icon
. Press the button ,
starts flashing by the
symbol. It means you entered edit
mode of the first phase. Press ; the
minutes indicator will begin flashing on
the display.
Set the target value by turning the
knob. Pitch - 1 minute. Press
again; the hours indicator will begin to
flash. Set the target value by turning
the knob. Pitch -1 hour. Then press
and set the target value of the
cooking temperature by turning the
knob. Pitch - 1°C. Press the button
to confirm the settings of the first
phase in the SMART program. Set the
cooking time/temperature settings of as
many phases as you need in the same
manner as described above for up to
nine phases. Press and hold the button
for 2 seconds to start the SMART
program. It will execute as many phases
as programmed. Phases which have a
zero value of cooking time will not start.
All customized settings will be stored in
the memory for future use. The user
may also adjust cooking settings of any