Saturn ST-MC9205, Manual, Page: 10 / 113

9
phase during runtime of the SMART but
those changes will not be saved in the
memory.
ATTENTION! Check how many phases
have been programmed earlier! If, for
example, three phases were used last
time but only two are needed now,
please do not forget to set the value at
zero cooking time for the third phase.
This can be done by entering into edit
mode of the third phase and resetting
the cooking time to 00:00 in the
manner described above.
«FAVORITE DISH»
Choose FAVORITE DISH by turning the
knob. The icon will light up
and the display will show the program’s
default settings: (10 minutes/ 30°C).
Press , the minute indicator will
begin flashing on the display. Set the
target value by turning the knob. Pitch -
1 min. Press again; the hour
indicator will begin flashing. Set the
target value by turning the knob. Pitch -
1 hour. Press
to edit the cooking
temperature. Set the target value by
turning the knob. Pitch - 1°C. Press and
hold the button for 2 seconds to
start the FAVORITE DISH program with
your customized settings. The user can
change the cooking settings during
runtime.
CHEF
Cooking settings are adjustable during
runtime. The only program which has no
adjustable values is EXPRESS. Do not
stop the program; simply press and hold
to adjust the cooking time during
runtime. The minute indicator will begin
flashing, enter the target value by
turning the knob. Pitch - 1 min. Press
, the hour indicator will begin
flashing; set the target value by turning
the knob. Pitch - 1 hour. Press
and
set the target value of the cooking
temperature by turning the knob. Pitch -
1°C. Press and hold the button
for 2 seconds to start the program with
new customized settings.
NOTE: The cooking temperature of
PILAF and BREAD are not adjustable. In
these two programs only the cooking
time can be adjusted.
ATTENTION! Cooking time is
adjustable in the following range: 1 - 59
minutes, 1 - 24 hours. Please set
correct cooking time values to avoid
malfunction.
DELAYED START
Most of the available programs can be
started in Delayed start mode within a
24-hour period. Choose the program by
turning the knob. Set preferable values
of cooking time/ temperature if needed.
Press and hold for 2 seconds until
Delayed start icon lights up and
the minute indicator display starts
flashing on the display.
Set the amount of time which must pass
until the start of the program by turning
the knob. Interval - 5 minutes. Press
, the hour indicator will begin
flashing. Set the target value by turning
the knob. Pitch - 1 hour. Press and hold
the button for 2 seconds to start
a program in the Delayed start mode.
Example: The time is 14:00. You need
a program to start at 18:50. You should
set Delayed start to 4 hours and 50
minutes.
Delayed start mode is unavailable for
the following set of programs: FRY/DEEP
FRY, CAKE, PILAF, BABY FOOD, MILK,
OMELETTE, .BREAD, PIZZA, EXPRESS,
and DESSERTS.
NOTE: Please remember that you must
set time which will pass before the start
of a program. Keep the total duration
time of a program in mind to be able to
plan your intended meal delivery.
NOTE: It is not recommended to leave
ingredients in the cooker longer than for
12 hours. Always consider the specific
features of food left in Delayed start
mode.