Saturn ST-FN8250, Manual

Page: 4 / 24

3
GB
FAN
Dear Buyer!
We congratulate you on having
bought the device under trade
name “Saturn”. We are sure that
our devices will become essential
and reliable assistance in your
housekeeping.
Avoid extreme temperature
changes. Rapid temperature change
(e.g. when the unit is moved from
freezing temperature to a warm
room) may cause condensation
inside the unit and a malfunction
when it is switched on. In this case
leave the unit at room temperature
for at least 1.5 hours before
switching it on.
If the unit has been in transit, leave
it indoors for at least 1.5 hours
before starting operation.
Warning:
Be sure to shut off electric supply at
main switch or circuit breaker before
installation.
Caution
1. Improper installation may result in
the risk of fire, electric shock, or injury
to persons.
2. To prevent risk of fire and electric
shock, do not use the unit near
windows.
3. Power plug must be removed from
power socket before cleaning, servicing,
maintenance and when moving from
one location to another.
4. The fan should be placed on a flat
and stable surface when operating to
avoid overturning.
5. The fan should not be placed in a
damp place or where humidity is high
(such as in a bathroom).
Assembly
1. Place stand 18 on stand 19 to form
X-base.
2. Place lower pipe with pipe support on
X-base with four screws provided.
3. Loosen and remove the pipe
connector from lower pipe. Slide plastic
base
ornament over lower pipe onto the
base. Extend upper (inner) pipe and
slide pipe connector over upper pipe
into lower pipe and tighten.
4. Attach the motor with switch housing
onto the upper pipe. Ensure the switch
housing is pushed fully onto the upper
pipe and secured with the screw
provided.
5. Loosen guard mounting nut from the
motor housing.
6. Position rear guard firmly to motor
housing and then fasten by turning
guard
mounting nut clockwise tightly.
7. Push the blade along motor shaft and
fasten it firmly with spinner by turning
counter clockwise.
8. Hang the front guard to rear guard
with the position fixer provided at the
rim of guard and then fix together with
screws and clips provided.
Service life – 3 years.
Before putting into operation shelf life is
unlimited.
1. Guard ornament
2. Front Guard
3. Position fixer
4. Spinner
5. Fan blade
6. Guard mounting nut
7. Rear guard