Gas Range Manual
Page 15
Revision: 21 Oct 2011
OPEN TOP BURNERS
1. Before attempting to light the appliance, the cover, if so equipped, shall
be opened.
2. Make sure all valves are closed before turning on the gas supply.
3. Turn on the pilot valve with a screw driver. Light up the pilot with a flame
gun.
4. When the pilot is lit, turn on the main valve by rotating it anticlockwise 90
o
to the position “ON”. The main burner will then be lit up. To turn off the
valve, rotate it clockwise to “OFF”. A 5 minute complete shutoff period
should be allowed before the appliance is relighted.
5. To turn off all open burners and pilot:
Turn off the main valves. When all burners go out, turn off the pilot valves
with a screw driver.
6. It need to wait for 5 minutes before the appliance is re-lighted.
GRIDDLE BURNER
1. Before attempting to light the appliance, the cover, if so equipped, shall be
opened.
2. Make sure all valves are closed before turning on the gas supply.
3. Turn on the pilot valve with a screw driver.
4. Light up the pilot with a flame gun: stick the flame gun through a hole of
about 0.6” diameter. The pilot is located 7” inside of the hole. Look in
the pilot window to ensure that the pilot is lit up.
5. When the pilot is lit up, turn on the main valve by rotating it anticlockwise
90
o
to the position “ON”. The main burner will then be lit up. To turn off
the valve, rotate it clockwise to “OFF”. A 5 minute complete shutoff period
should be allowed before the appliance is relighted.
6. To turn off all open burners and pilot:
Turn off the main valves. When all burners go out, turn off the pilot valves
with a screw driver.
OVEN BURNER
WARNING: ENSURE THE PILOT IS ESTABLISHED BEFORE
TURNING ON THE THERMOSTAT. THE PILOT FLAME CAN BE SEEN
THROUGH THE VIEWING HOLE.
1. Before attempting to light the appliance, the cover, if so equipped, shall be
opened.
2. Make sure the thermostat located on the control panel is turned off.
