7
Mounting of the cradle
Installation of the Mounting Bracket and Clam Cradle
Diagram 7
1. Remove the screw holding the top portion of the Mounting Bracket and separate the top portion of
the mounting bracket from the bottom portion.
2. Retain position of this screw, as it will be needed to reattach the top to the bottom as described
below.
3. Mount the bottom portion of the mounting bracket in the desired position in the vehicle using the
four self tapping sheet metal screws included, in such a way so as not to interfere with air bag
deployment and within easy reach of the driver operator to ensure easy access to the portable.
4. Maintain sufficient clearance above and below the Mounting Bracket for the Cradle and for the
cables
5. Attach the cradle to the top portion of the mounting bracket with a single screw through the rear of
the cradle.
6. In order to obtain a better position of the portable’s display when it is in the cradle, adjust the
angle of the cradle by loosening the screw and moving the cradle to the desired position. Retighten
the screw when finished.
Note:
The Cradle contains four small holes on its back for an optional flush mount kit (not
included).