SATO VP208, Operator'S Manual

Page: 13 / 48

11
Operations
2 Operations
This printer has two modes, normal startup and test
print mode.
Power supply
PRINT SCREEN
ADJUSTMENT MODE
SETTINGS MODE
NORMAL MODE
Power on with
holding the Media feed/
Enter button pressed.
TEST PRINT MODE
1. Normal Startup
1. Printer Startup and Shut Down
1.1 Printer Startup
1
. Press the button (
Power
button).
2
. When “ONLINE” is displayed,
preparation is completed.
ONLINE
The first time “FEED AT BOOT” is activated. If a label
roll is not set in the printer or not set in the printer
correctly, an error is displayed.
1-2. Printer Shut Down
1
. Press the button (
Power
button).
2
. The SAVING MEMORY screen appears.
This appears when the power is turned off while data are
being stored or being cleared.
Writing screen
Please wait
SAVING MEMORY
Screen for writing data.
Message: Please wait.
Clearing screen
Please wait
CLEARING MEMORY
Screen for clearing data.
Message: Please wait.
■ Notes on Writing Data
• The displayed period depends on the data size.
• If the power is turned off during storing of multiple
items, data being stored are saved but subsequent
data will not be saved.
Example)
If five data items are to be stored and the power
is turned off during storing of the third data item,
“SHUTTING DOWN...” appears when the third
data item has been saved. The fourth and fifth
data items will not be saved.
■ Notes on Clearing Data
• If the power is turned off during clearing multiple data,
“SHUTTING DOWN...” appears when clearing is
completed.
Example)
If 999 data items are to be cleared and the power
is turned off during clearing of data, "SHUTTING
DOWN..." appears when clearing of 999 data item
has been completed. Clearing 999 data items
takes about three minutes.
3
. “S HUTTING DOWN... ” appears.
SHUTTING DOWN...
Power-down is in progress. Wait until the display
disappears.
Depending on the Bluetooth communication status, the
time for displaying this screen may be longer.