SATO Smart Keyboard Programming Manual Download Page 15

Page: 15 / 93

Keyboard

Programming Manual

SATO Europe

Extended File Manager

Extended File Manager can be accessed by pressing

ALT-D

. Files stored in flash

memory are read-only. File listing, deleting, and the download utility must be operated

through Extended File Manager. The download and delete files process will be different

from files stored in standard memory. The operations of Extended File Manager are

described below:

LIST FILES:

All the files stored in Flash memory will be listed. The BASIC files stored in Flash

memory will also be listed in the BASIC program file list by pressing

FORM

ERASE FILES:

This utility delete all the files stored in Flash memory. The “KILL” command can’t

delete files stored in Flash memory.

DOWNLOAD FILES:

Enter this utility before downloading files to Flash memory. Download files either by

DOS command or by K012 Windows software. Press the

EXIT

key to exit the

download utility.

Note:

1. ALL files will be deleted when you invoke the DOWNLOAD FILES utility.

Copy all the files again although only ONE file is appended.

2. With password locked on, the above utilities will be disabled.

EXTENDED FILE MANAGER

LIST FILES

ERASE FILES

DOWNLOAD FILES

Summary of Contents for Smart Keyboard






























































































Search results

Summary of Contents for Smart Keyboard

Reviews:

Related manuals for Smart Keyboard

Brands by name

Popular brands

SATO Smart Keyboard, Programming Manual

Search results

Summary of Contents for Smart Keyboard

Reviews:

Related manuals for Smart Keyboard

Brands by name

Popular brands