SATO Smart Keyboard Programming Manual Download Page 12

Page: 12 / 93

Programming Manual Keyboard

SATO Europe

Keyboard Configuration Setup

Keyboard configurations can be changed by pressing the

ALT-F1

keys. The left and

right arrow keys are used to select different parameters. Press

ENTER

to enable the

selected parameter. Press

EXIT

to return to the top of the menu.

COM1, COM2 SETUP:

With COM1, COM2 SETUP, users can select different communication parameter

as well as handshaking to download or upload data.

DATE / TIME SETUP:

The built-in Real Time Clock is compatible with year 2000. The leap year timing is

automatic. The available setting of year is from 1950 to 2049.

INFORMATION:

The information lists the available memory (SRAM) in system and the extended

Flash memory status. If the extended memory is installed, it shows 8M. Otherwise

“None” is shown on the display.

UTILITY SETUP:

The code page, country code and key sound ON/OFF is set in UTILITY SETUP.

Setup Utility

COM1 SETUP

COM2 SETUP

DATE /TIME SETUP

UTILITY SETUP

PASSWORD SETUP

INFORMATION

Summary of Contents for Smart Keyboard






























































































Search results

Summary of Contents for Smart Keyboard

Reviews:

Related manuals for Smart Keyboard

Brands by name

Popular brands

SATO Smart Keyboard, Programming Manual

Search results

Summary of Contents for Smart Keyboard

Reviews:

Related manuals for Smart Keyboard

Brands by name

Popular brands