Handheld Labeling Solutions
Open the Label Roll Door.
1
Lift the marked tab of the tool’s
door to open the bottom of
the tool.
2
After opening the door, gently
lift the pressure plate and pull to
open up the entire tool.
3
Take the roll of labels and
remove one round, eliminating
any glue, simplifying the loading
process.
4
Drop the labels down the center
of the tool, gently feeding the
end through until it slides out the
bottom.
5
After securing the roll of labels
onto the spindle and placing
the guide on top of the roll of
labels, close the label roll door.
6
Flip the tool upside down. Align
the labels within the guide and
tightly close the pressure plate.
7
Pull the labels back, aligning the
label’s tab with the reel’s knob.
Close the door on the bottom of
the tool. It is now ready to use.
8
Loading Label Rolls
Pull the ink roller
assembly up.
1
While supporting the ink
roller assembly with one
hand, gently slide the ink
roller off to the side.
2
Take the fresh ink
roller and slide it
onto the assembly.
3
Gently release the assembly
allowing it to spring back
into place. The tool is now
ready to use.
4
Replacing Ink Roller
Pull the pointer in or out as
required and rotate to select
print character.
1
Push the pointer back to its
original position.
2
Setting Print Characters
A reliable Handheld Labeling Solution, the
PB1 and
Samark Series
allow users to easily tag products.
Lightweight and ergonomic, these handheld labelers
are intuitive to use, allowing end users to smoothly
manage operations.
Label Roll Cover
Tool Door
Tool Door
Ink Roller Assembly
Handle
