4
Place an empty ribbon core on the
ribbon take-up spindle.
Ribbon core
5
From the ribbon supply spindle,
thread the carbon ribbon under
the thermal head and to the
ribbon take-up spindle.
Tape the free end of carbon
ribbon to the ribbon core, and
wind a few times in the direction
of an arrow.
Be sure to confirm that the carbon
ribbon is set as shown in the picture
on the right.
Tape
Ribbon
take-up
spindle
*Thermal head and the surrounding
areas will become hot during the
printing process.
When changing the labels after
printing, be careful not to get burnt.
*Contacting the edge of thermal head
with bare hands may result in injury.
When changing the labels, be
careful not to get injured.
Caution
16
Summary of Contents for LM400e Series
Page 1: ...LM400e Series...
Page 32: ......
