SATO CL-408 Quick Manual Download Page 1

Table of Contents

What You Get . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Controls and Indicators

. . . . . . . . . . . . . . . . . . . . . . . . . . 3

Operator Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Adjustments

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Rear Panel Connections

. . . . . . . . . . . . . . . . . . . . . . 4

Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Connecting the Printer . . . . . . . . . . . . . . . . . . . . . . . 5
Printing a Test Label . . . . . . . . . . . . . . . . . . . . . . . . 6
Configuring the Printer . . . . . . . . . . . . . . . . . . . . . . . 7
Computer Connections . . . . . . . . . . . . . . . . . . . . . . . 7

CL408/412 Software and Drivers . . . . . . . . . . . . . . . . . . . . . 9

Label Wizard SE . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Windows Drivers . . . . . . . . . . . . . . . . . . . . . . . . . 10

What to do if it will not print . . . . . . . . . . . . . . . . . . . . . . . 10

CL408/412 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 14

Media and Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Options

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

This Quick Guide was prepared to get you up and running quickly. It will
enable you to get your new SATO CL408/412 installed and printing with a
minimum of effort. However, it is recommended that you familiarize your-
self with the contents of the CL408/412 Operator and Technical Reference
Manual for detailed descriptions so you will be able to properly use the
printer to its full potential.

CL408/412 Quick Guide

Page 1

PN 9001067 Rev A

Summary of Contents for CL-408

















Reviews: