background image

6

SPECIFICATIONS

*Specifications subject to change for improvement with or without notice.

7210-00 / 7211-00

7215-00

Cat No.

Model

Drum
rotation

Sensors

Measuring
range

Accuracy

Minimum
graduation

Cylinder 
rotation 
accuracy

Battery life

Storage
ambient

Dimensions

Weight

Accessories

approx. 3.6 Kg

approx. 3.3 Kg

One box (55 sheets) of 7-day chart for 1 year use 
A chart holder (except 7211-00), Test result
Two “C” size batteries (applicable for quartz type only)

±

5 min. per day

±

35 min. per 7 days

±

160 min. per 32 days (for quartz type only)

Temperature : Bimetal strip
Humidity 

: Human hair bundle

Temperature :  

±

1

 (at +10 to 30

)

 

 

±

2

 (other than above)

Humidity 

:  

±

3%RH (at +15 to 25

, 20 to 95%)

 

±

5%RH (other than above)

Temperature :  1

Humidity 

:  1%

Temperature: -15 to 40

 (for No. 7210-00 and No. 7215-00)

                      -10 to 50

 (for No. 7211-00) 

Humidity 

: 0 to 100% RH

External fan (option)

The external fan (option) can be attached to the 
acrylic  cover.  The  fan  improves  response  by 
directly pulling surrounding air into the instrument.

Warranty

Our products are warranted to be free from defects in materials and workmanship 
for  a  period  of  one  year  from  date  of  shipment.    If  repair  or  adjustment  is 
necessary  and  has  not  been  the  result  of  abuse  or  misuse  within  the  one-year-
period, please return the units on - Freight Prepaid - basis and correction of the 
defect  will  be  made  without  charges.    We  alone  will  determine  if  the  product 
problem is due to deviations or customer misuse. 

Out-of-warranty products will be repaired on charge basis. 

Return of items

Authorization  must  be  obtained  from  us  before  returning  items  for  any  reason. 
When  applying  for  authorization,  please  include  data  regarding  the  reasons  the 
items are to be returned. 

about 1 year at use of 7 day rotation

-----

0 to 40

, 20 to 80%RH

 

(no condensing)

336 (W) 

×

 148 (D) 

×

 295 (H) mm

NS 

-Q (Quartz type)

NS 

-S (Spring-wound type)

1 day, 7 day and 32 day changed
by cylinder speed switch

1 day and 7 day changed
by gear

Summary of Contents for Sigma-II NS II-Q









Reviews: