6
Battery
compartment
Lever
LED lamp
Cylinder speed switch
⚫
After inserting batteries, close the lid pushing it downward.
Name of each section
“How to check battery condition with LED lamp”
1. LED lamp will go out if the battery power is lower than 2.2VDC
±
10% under normal
ambient.
2. When the LED lamp goes out, replace batteries to new ones.
NB. Recording cylinder stops in one month after the LED lamp goes out.
Changing cylinder speed
The cylinder speed switch is set for 7-day operation when shipped from the factory. Set the
switch at the top of cylinder clock to 32D for 32-day operation and change the chart to 32-day
chart.
Cylinder speed switch
* 1-day operation of both model and 32-day operation in No. 7202-00
can’t be used because there
are no applicable charts.
