4 Fountain House, Cleeve Road,
Leatherhead, Surrey KT22 7LX England
Tel: +44 (0)845 873 0101
Email: [email protected]
satmap.com
BM-UG-EN-1110
Attaching the Mount Battery Back to the Active 10
Unlock
Lock
1. You will need to replace the Standard Battery Back on the Active 10 with
a Mount Battery Back that has a clip for mounting.
2. Lift the metal D-ring on the back of the Active 10 and rotate counter-
clockwise to an unlocked position
(L)
and lift the back off.
3. Place the Mount Battery Back onto the back of the unit
(N)
. Make sure
you locate the tab at the base and slide it into the unit first.
4. Rotate the metal D-ring clockwise to the lock position
(M)
to secure the
Mount Battery Back into place. (You may need to press down gently to
turn it).
Fixing the Active 10 to the Bike Mount:
1. Slide the Mount Battery Back clip on the Active 10 into the groove on the
Bracket. Always ensure it locks into place.
2. To remove the Active 10 unit from the Bike Mount, simply press the gray
Detaching Levers
(D)
on either side of the Bracket and slide the unit off.
Disclaimer:
Satmap Systems is not liable for damages and injuries caused
by improper use or fitting of the Bike Mount. Subject to technical changes
and errors. Satmap does not disclaim any statutory rights relating to faulty
or misdescribed goods that cannot be disclaimed under applicable law.
Translations into languages other than English are provided for information
only. In the event of any confusion, the English text is the controlling language.
Please note: Product specifications are liable to change without notice.
L
M
