background image

INSTRUCTION

Charging

If the finder is being used for the first time, it may be necessary to charge 
for no longer than 12 hours. If the battery runs low during use, you should 
recharge it for 5 or 6 hours, it will be full when the power light turns to 
orange from green.
Fully rechargeable Li-on batteries can last approximately 4 hours.
It may be necessary to turn off the finder while charging. A universal 
charger operating on 110vac/60Hz or 220vac/50Hz makes it usable 
anywhere.

Turn on/off

Press and hold the POWER button for 2 seconds, the finder will turn on.
Press and hold the POWER button for 2 seconds again to turn off.

Language setting

From the system setting menu, you can find the language setting item. 
Select your language and press the OK button.

Restore factory setting

From the system setting menu, you can find the factory Reset item. 
You can choose  “Factory Reset”. Press the OK button to confirm. 
After a factory reset, all modified and saved contents will be lost.

Input Local Longitude and Latitude

From the system setting menu, you can find the local position item. 

Local Longitude:

 Input your local longitude. 

Local Latitude:

 Input your local latitude.

SATHERO

Summary of Contents for SH-400HD








Reviews: