INSTRUCTION
Satellite Finding
Select Satellite
From the finding menu, move the cursor to Satellite, you can browse the
satellites list, use [◄][►] buttons to switch between different satellites, select
the one you want, press the OK button.
Select LNB
From the finding menu, move the cursor to LNB Type, Use [◄][►] buttons to
choose LNB Type between Single, Universal and MDU, then move the cursor
to the next bar, Use [◄][►]buttons to select the default LNB frequency. The
LNB frequency must be the same as the LNB on the antenna.
Select parameter
From the finding menu, move the cursor to Frequency, use [◄][►] buttons to
select the parameter that you want.
If no default parameters, press the OK button to edit, you can key in the
frequency, symbol rate and switch the polarization by using direction buttons
and pressing the OK button.
Detect satellite signal
After signal detected, the finder will display signals at the signal bar and
beeps. View the PWR,C/N,MER, a.BER and NIT on the screen, if the value of
POWER is higher, the strength of signal is better and stronger. You can also
search the satellite channel list by pressing the OK button.
From the finding menu, move the cursor to search, Use [◄][►] buttons to
choose search Type between TP, Satellite and Blind.
:
SATHERO
