Satel VERSA Plus INT-TSG, Quick User Manual

Page: 5 / 11

SATEL VERSA Plus 3
Arming without partition selection Disarming and/or alarm clearing
[CODE] - full arming
[CODE] - night arming
[CODE] - day arming
Arming Partition 1
[CODE]
- full arming
[CODE] - night arming
[CODE] - day arming
Arming Partition 2
[CODE] - full arming
[CODE] - night arming
[CODE] - day arming
[CODE] - in both partitions
[CODE] - in partition 1
[CODE] - in partition 2
User menu
[CODE] - entering the user menu, in
which the following submenus and functions
are available:
[1#] Change code
[2] Users
[21#] New user
[22#] Edit user
[23#] Remove user
[3#] Abort v.msg.
[4] Bypasses
[41#] Inhibit
Quick arming
[42#] Isolate
- partition 1 full arming
[5#] Event log [LCD keypad only]
- partition 1 night arming
[6] Settings
- partition 1 day arming
[61#] A-arm defer.
- partition 2 full arming
[62#] RTC clock
- partition 2 night arming
[63#] Timers
- partition 2 day arming
[64#] Tel. numbers
[65#] Msg.clr.codes
or - both partitions full
arming
[7#] System state
[8#] Control
or - both partitions night
arming
[9] Tests
[91#] Zone test
or - both partitions day
arming
[92#] Output test
[93#] Wrls/GSM sig.
[94#] Manual MS tst
Quick inspection of partition status
[95#] MS1 test
press for 3 seconds
[96#] MS2 test
[97#] VERSA version
[98#] Expander ver.
Triggering the alarm from keypad
[99#] Supply volt.
fire alarm
- press for 3 seconds
[90#] Outputs reset
panic alarm
- press for 3 seconds
[0] Service
medical alarm
- press for 3 seconds
[00#] Service mode
[01#] Start DwnlTEL
Quick control of outputs
[02] Start DwnlGSM
[021#] GSM audio [number key] - activating output
[022#] GSM CSD
[number key] - deactivating output
[03#] Start DwnlUSB
[04#] FinishDwnlUSB
Turning the CHIME on /off
[05#] Serv. access
press for 3 seconds
[06#] Access time
[07#] ETHM-1
 DLOADX
[08#] GPRS  DLOADX
Simple auto-arming deferment
[09#] Replace bat.
press twice