8
GPRS-T1
SATEL
Remote programming
– enable this option if remote programming of the module with the
use of GPRS technology is to be available.
Initiating number only from list of telephone numbers for messaging
– if this option is
enabled, the SMS message initiating the remote programming must be sent from
a telephone whose number is stored in the converter memory in the list of telephone
numbers for messaging.
Initiating SMS
– a code which must be included in the SMS message sent to the converter
GSM telephone number, so that the converter can make an attempt to connect to the
computer whose IP address and communication port are indicated in the SMS message.
Fig. 7. "GSM telephone, Monitoring stations" tab.
GSM telephone
PIN
– SIM card PIN code (if the card requires entering the PIN code).
Note: Entering invalid PIN code may result in blocking the SIM card.
SMS center number
– telephone number of the Short Message Service Center, which
delivers SMS messages. Entering the number is necessary if the converter is to send SMS
messages. The number stored in the converter must be suitable for the network in which
the GSM telephone is working (depending on the SIM card installed in the converter).
GPRS APN
– Access Point Name for Internet GPRS connection.
User
– user name for Internet GPRS connection.
Password
– password for Internet GPRS connection.
Note: APN, user name and password must be defined, if GPRS data transmission (event
codes, programming) is to be available.