13
ACCO-KP2
SATEL
5.2.2 Access denied
The door will remain locked if:
the identifier is unknown,
the user cannot get access because:
the keypad only grants access based on the card, but the code has been entered,
the keypad only grants access based on the code, but the card has been used,
the user is not authorized to unlock the door according to the access schedule,
the door is blocked,
the user exceeded the defined limit of entries,
the user tries again to enter or exit
– the “Anti Passback” option is enabled,
the module operates in the mantrap / airlock configuration and the other door is open,
the keypad is blocked by the “Anti-Scanner” function.
5.3 Other functions available when the code is used
The following functions are available when the door status is controlled.
5.3.1 Blocking the door
1. If no LED is turned ON (the door operates in the normal mode), make sure that the door is
closed.
2. Enter the code and press
. The door will be blocked. The
LED will turn ON in the
keypad.
5.3.2 Unblocking the door
1. If no LED is turned ON (the door operates in the normal mode), get access and open the
door (see p. 12).
2. Enter the code and press
. The door will be unblocked. The
LED will turn ON in the
keypad.
5.3.3 Restoring the door to normal operation mode
If the
LED (door blocked) or the
LED (door unblocked) is turned ON, enter the code
and press
. The door will be restored to normal operation mode. The LED will turn OFF.
5.4 Other functions available when the proximity card is used
The following functions are available when the door status is controlled.
5.4.1 Blocking the door
1. If no LED is turned ON (the door operates in the normal mode), make sure that the door is
closed.
2. Present the card on the keypad reader and hold for about 3 seconds. The door will be
blocked. The
LED will turn ON in the keypad.
5.4.2 Unblocking the door
1. If no LED is turned ON (the door operates in the normal mode), get access and open the
door (see p. 12).
2. Present the card on the keypad reader and hold for about 3 seconds. The door will be
unblocked. The
LED will turn ON in the keypad.