Satel ACCO-KP2, User Manual

Page: 11 / 21

9 ACCO-KP2 SATEL

the user is not authorized to unlock the door according to the access schedule,

the door is blocked,

the user exceeded the defined limit of entries,

the user tries again to enter or exit
– the “Anti Passback” option is enabled,

the module operates in the mantrap / airlock configuration and the other door is open,

the keypad
is blocked by the “Anti-Scanner” function.
4.3 Other functions available when the code is used
4.3.1 User menu
Enter the code and press to get access to the user menu. The list of functions will be
displayed. These are the functions that you will be able to run. Which functions are available
to you depends on your rights and on the door status.
To scroll through the list, use the

or

key. Point the cursor to the function you want to
run
. Press the ►,
or key to run the function. Below, only the key is used to
describe how to run a function, however, you can use any of these three keys.
List of functions
Unblock door
– use to unblock the door. This function is available to the user with the
“Switching” right.
Block door
– use to block the door. This function is available to the user with the “Switching”
right.
Normal mode
– use to switch the door to normal operation mode. This function is available
to the user with the
“Switching” right.
Change code
– use to change your user code. This function is available to the user with the
“Change code” right.
Module data: Module ID
– use to display the module identifier set in the ACCO-SOFT-LT
program. This function is available to the user with the
“Administrator” right.
4.3.2 Blocking the door
1. Enter the code and press .
2. Use the

or

key
to find the “Block door” function.
3. Press . The door will be blocked. The LED will turn ON in the keypad.
4.3.3 Unblocking the door
1. Enter the code and press .
2. Use the

or

key
to find the “Unblock door” function.
3. Press . The door will be unblocked. The LED will turn ON in the keypad.
4.3.4 Restoring the door to normal operation mode
1. Enter the code and press .
2. Use the

or

key
to find the “Normal mode” function.
3. Press . The door will be restored to normal operation mode. The LED will turn OFF.