Satec PNA295-1, Installation And Operation Manual

Page: 3 / 28

i
LIMITED WARRANTY
The manufacturer offers the customer a 24-month functional warranty on the
instrument for faulty workmanship or parts from date of dispatch from the distributor.
In all cases, this warranty is valid for 36 months from the date of production. This
warranty is on a return to factory basis.
The manufacturer does not accept liability for any damage caused by instrument
malfunction. The manufacturer accepts no responsibility for the suitability of the
instrument to the application for which it was purchased.
Failure to install, setup or operate the instrument according to the instructions herein
will void the warranty.
Your instrument may be opened only by a duly authorized representative of the
manufacturer. The unit should only be opened in a fully anti-static environment.
Failure to do so may damage the electronic components and will void the warranty.
NOTE
The greatest care has been taken to manufacture and calibrate your instrument.
However, these instructions do not cover all possible contingencies that may arise
during installation, operation or maintenance, and not all details and variations of this
equipment are covered by these instructions.
For additional information regarding installation, operation or maintenance of this
instrument, contact the manufacturer or your local representative or distributor.
This manual provides instructions for using the PNA295-1. For instructions and
information on using the PM295 and the accompanying PAS295 software package,
you are advised to refer to the relevant user's manuals.
BG0149 REV. B