Satec ETC2002, Reference Manual

Page: 21 / 22

21
5 Data Formats
Format Code Value Description Notes
Timestamp
F1
Local time in a UNIX-style format. Represents the number
of seconds since midnight (00:00:00), January 1, 1970.
The time is valid after January 1, 2000.
Event Type ID
IRIG-B Sync Event
0x0800 XP client event (See F3 for Event data contents)
DI Event
0x0A00 Generic DI event (Event data contains a DI status value)
Data Server Events
0x1400-0x1463 Status polling event (masked), low byte = exchange
number. Event data contains the event status value
Self-Check Diagnostics Event
0x5D00 Action/Cause (See F3 for Event data contents)
Self-Update Event
0x5E00 RTC DST/Standard time update
Run-time Error
0x6000 Run-time exception
Hardware Diagnostics Event
0x6200 Action/Cause (See F3 for Event data contents)
External Event
F2
0x6300 Action/Cause (See F3 for Event data contents)
Event Data
0 Power down
1 Reserved
2 RAM/Data error
3 CPU Watchdog reset
4 Reserved
5 CPU exception
6 Reserved
7 Software Watchdog
8 Power up
9 Device reset
10 Configuration reset
11 RTC fault
12 Configuration fault
13 XP fault counter
14 Reset Timer expired
15 MASTER EEPROM fault
16 Event Log corrupted
17 Data Log corrupted
18 Data Server setup
19 Reserved
20 C Library error
21 RTOS Kernel fatal error
22 Task error
24 IRIG-B signal lost
25 IRIG-B time failed
26 IRIG-B time locked
27 XP session started
28 XP session completed successfully
F3
29 XP session failed
Device Diagnostics (bitmap)
Bit 0 = 1 Reserved
Bit 1 = 1 Permanent fault
Bit 2 = 1 RAM/Data error
Bit 3 = 1 CPU Watchdog reset
Bit 4 Reserved
Bit 5 = 1 CPU exception
Bit 6 Reserved
Bit 7 = 1 Software watchdog
Bit 8 = 1 Power down
Bit 9 = 1 Device reset
F4
Bit 10 = 1 Configuration reset