SATA satajet 1000 b, Operating Instructions Manual

Page: 486 / 512

486
US
SATAjet 1000 B (RP/HVLP) Operating Instructions
Danger! Notice!
• Put spray gun immediately out of operation when damaged, discon-
nect it from the compressed air circuit!
• Never manipulate or technically modify the spray gun!
• Use original SATA spare parts and accessories only!
• Disassemble and install components very carefully! Exclusively use
included special tools!
• Exclusively use spray gun washing machines recommended by SATA!
Please observe the operating instructions!
• Never spray materials containing acid, alkaline or benzine!
• Alyways keep the spray gun away from ignition sources, such as open
fire, burning cigarettes or non-explosion-proof electronic devices!
• When working with the spray gun, always limit solvents, paints or
other coating media to the quantities which are required for the paint
job! Excessive material must be returned to the designated storage
areas afterwards!
6.3. Personal Protection Equipment
Warning!
• When using, cleaning or maintaining the spray gun, always wear
approved
breathing and eye protection equipment
as well as
suitable protective gloves, overalls and safety boots !
• When using the spray gun, noise levels of 85 dB(A) may be exceed-
ed. Wear suitable hearing protection !
• Risk of exposure to hot surfaces
Wear appropriate protective clothing when handling hot materials
(temperature higher than 43 °C; 109.4 °F).
The painter is not exposed to vibrations while using the spray gun. Repul-
sive forces are minimal.
6.4. Use In Explosive Areas
The spray gun is permitted for use / storage in explosion hazard areas of
ex-zone 1 and 2. The product labelling must be adhered to.
143842-BAL-SATAjet 1000 B.indb 486 31.10.2019 13:23:33