39
EN
Operating Instructions SATA LPS R 2000, SATA LPS RB 2000 RP, SATAminijet 1000 A S HVLP
Operating Instructions SATA LPS R 2000, SATA LPS RB 2000 RP, SATAminijet 1000 A S HVLP
9.1. Replacing the nozzle set
The nozzle set consists of a tested combination of the air cap
[6-6]
, the
fluid tip
[6-5]
and the paint needle
[6-3]
. Always replace the entire nozzle
set.
Dismantle the nozzle set
■ Unscrew the material flow control
[6-1]
.
■
Remove the spring
[6-2]
.
■
Remove the paint needle
[6-3]
.
■
Unscrew the air cap
[6-6]
by hand.
■ Screw the fluid tip
[6-5]
out of the gun body
[6-4]
using the universal
spanner
[3-5]
.
Mount the nozzle set
Attention!
Damage from incorrect installation
The fluid tip and paint needle can be damaged if assembled in the
wrong order.
→ Fit the fluid tip before the paint needle.
→ Never screw the fluid tip against an energised
paint needle.
Screw the fluid tip
[6-5]
into the gun body
[6-4]
and tighten using the
universal spanner
[3-5]
.
■
Screw the air cap
[6-6]
onto the gun body.
■
Insert the paint needle
[6-3]
.
■
Insert the spring
[6-2]
.
■ Screw on the material flow control
[6-1]
. Adjust the material flow if nec
-
essary (see chapter 9.2).
9.2. Replacing the air distribution ring
Only present in SATA LPS RB 2000 RP and SATAminijet 1000 A S
HVLP.
Summary of Contents for LPS R 2000
