SATA AE5736, User Manual

Page: 13 / 18

中文
EN AE5736/AE5737
13
- Ensure that the material to be cleaned is in a fixed state to prevent it from moving during the cleaning operation.
- Warning: When cleaning the engine combustion chamber, ensure that one side of the engine exhaust branch or intake
branch is removed.
- Aim the nozzle at the thing to be cleaned, and press the button on the cleaning spray gun. During the period, the
distance of the nozzle should be controlled according to the severity of the dirt of the cleaned object - the more
serious the dirt is, the closer the distance of the nozzle is relative to the requirement, and the other way around.
- When cleaning the engine room, pay attention to protect the sound insulation sponge, foamed cotton, insulating tape,
air conditioning pipe insulation cotton and other fragile items in the cabin, do not spray the nozzle at the fragile items,
otherwise it will cause damage.
- Please add dry ice during cleaning. Add dry ice according to actual requirements to prevent waste.
- Adjust the dry ice supply through the "frequency adjustment" on the software, which is recommended to be set
between 10-20 for routine cleaning. If the cleaning intensity is set too high, the dry ice output will result in the waste
of dry ice.
Use endoscope to take photos and print reports
- Open the "Information Management" function on the industrial computer, enter the company name, detailed address,
service phone number, sales phone number, license plate prefix and other information;
- Click the "Add" button on the right side of the information bar of the business host, enter the name of the host and
click "Save", click the "Add" button on the right side of the information bar of the operation technician, enter the name
of the operation technician and click "Save". Click the Save button after confirming the correct information input;
- Close the software and reopen it. The license plate number will display the prefix of the license plate, and the
corresponding information such as the owner, brand and contact person will be registered in turn. After the input,
operate the camera shutter button. Complete the before and after cleaning images, click Save, click Print, and select
the default printer to print.
Chapter
Ⅲ
Safety precautions
- The temperature of dry ice is extremely low. It is important to ensure that the exposed parts of the body do not come
into direct contact with dry ice at all times. Otherwise, dry ice may cause skin burns on the exposed parts of the body.
- Do not leave non-workers, such as children, alone with dry ice, which can lead to frostbite accidents.
- Please temporarily store dry ice in a well ventilated place. Do not put dry ice in a completely sealed container (such as
mineral water bottle), otherwise it may cause explosion.
- Wear thick cotton gloves when taking dry ice (plastic gloves have no blocking effect). Wear gloves when opening the
cover plate of feeding mouth of the machine during operation, otherwise it may cause low-temperature burn.
- Do not aim the cleaning gun at the human body at any time, which may lead to personal injury, especially when the
machine is in normal operation, it is forbidden to spray the gun in the direction of the human body.
- Before starting the machine and equipment, make sure that the power supply is AC220V/10A, the three-pin socket
with reliable grounding and the air supply is 0.6-1Mpa, so as to prevent the machine from being damaged if the basic
conditions do not match.
- Before starting the machine and equipment, make sure that the equipment is firmly placed and the front wheel brake
is enabled to prevent the equipment from moving by itself during use and causing operational accidents.
- Before starting the machine and equipment, check the reliable connection of the gas circuit parts to prevent the