18
51091C/51090C
OPERATION GUIDELINE
Before the use
1) Charging
This charger and machine shall be used together. Do
not use other chargers.
The machine has a protection circuit. When the
battery is low, the protection circuit is turned on and
the machine stops rotating.
The machine may become hot under the high
temperatures or after a long period of operation. At
this time, do not charge immediately but wait until
the battery is cooled. Otherwise, the service life of
battery will be shortened or the charging failure may
be caused due to overheating.
For the first charging or after a long period of storage,
the efficiency of first charging may only reach about
60%. After 2-3 charging and discharging cycles, the
battery efficiency may reach 100%.
2) Installation and removal of battery pack (see
Figure A)
Press the lock buttons on both sides of battery pack
and pull it out. To insert the battery pack, simply push
it into the machine. Avoid the excessive force.
ASSEMBLY
WARNING
When installing or replacing the accessories, turn off
the switch and remove the battery pack. Otherwise
the serious injury may occur.
1. Installation of side handle (Figure B)
NOTE
Be sure to install the side handle securely before
operation.
Align the side handle with the threaded hole in the
gearbox and turn them clockwise until the side handle
is tightened;
Caution:
Please read the instruction
carefully before operating the machine.
B
C
fully-closed
cut off wheel grinding wheel
semi-closed
H
A
D
2
3
1
E
1
G
1
F
1
2
3
Summary of Contents for 51090C
