13
V_SC_5109NC_202104
GENERAL SAFETY WARNING OF ELECTRIC
TOOL:
Read all safety warnings, instructions,
diagrams and regulations provided with the
electric tool.
Failure to follow the instructions
listed below may result in electric shock, fire and/or
serious injury.
Keep all warnings and instruction for review.
"Electric tool" in the warnings refers to the electric
tool driven by mains supply (wired) or the battery
(wireless).
a) Workplace safety
1) Keep the work area clean and bright.
Disordered and dark site may cause
accidents.
2) Do not operate the electric tool in the
explosive environment such as the
flammable liquid, gas or dust.
The spark
generated by the electric tool will ignite
the dust or gas.
3) Keep away from children and bystanders
when operating the electric tool.
Inattention may cause you to lose control
of tool.
b) Electrical Safety
1) Plug of electric tool shall be supported
by the socket. Never modify the plug
in any way.
Any change-over plug
shall not be used for the electric tool
to be grounded. Unmodified plug and
corresponding socket will reduce the risk
of electric shock.
2) Do not contact the grounded surface
such as the pipe, cooling fin and
refrigerator.
If your body is grounded,
the risk of electric shock will increase.
3) Do not expose the electric tool to the
rain or moisture.
Water entering the
electric tool will increase the risk of
electric shock.
4) Do not abuse the cord. Never carry,
pull the electric tool with cord or pull
out its plug. Keep the cord away from
heat source, oil, sharp edges or moving
parts.
Damaged or entangled cords may
increase the risk of electric shock.
5) For the outdoor application, an extension
cord for outdoor use shall be used.
A
cord suitable for outdoor will reduce the
risk of electric shock.
6) If it is inevitable to operate the electric
tool in the humid conditions, the residual
current device (RCD) shall be used.
RCD
is able to reduce the risk of electric
shock.
Note:
"residual current device (RCD)". may be
replaced by the "ground fault circuit
interrupter (GFCI)" or "earth leakage
circuit breaker (ELCB)".
c) Personal safety
1) Keep alert and awake when operating
the electric tool. Do not operate the
electric tool when you are tired or have
medication, alcohol or a therapeutic
response.
Instantaneous negligence in
the operation of electric tool may result
in serious personal injury.
2) Wear the personal protective equipment.
Always wear the goggles.
Protective
devices, such as the dust mask, anti-slip
safety shoes, helmet, listening protection,
etc., are able to reduce the personal
injury.
3) Prevent the accidental starting. Make
sure that the switch is turned off when
connecting the power supply and/or
battery box, picking up or carrying the
WARNING
Summary of Contents for 51090C
