SATA 51074C, Operation Instruction Manual

Page: 19 / 20

19 V_SC_51074C_202104
situation. In case of heavy work, the battery
pack will run out soon. Do not charge in
a temperature below 0 °C or above 35 °C.
Otherwise, the performance of battery pack will
be affected.
MAINTENANCE
Be sure to pull off the plug before repairing
or replacing the machine.
The electric tool
does not require additional lubrication or other
maintenance. Do not wash the electric tool with
the water or chemical cleaner. Wipe it off with
a dry cloth. Tool shall be stored under the dry
conditions and kept clean at the vent of motor.
Try not to use it in a dusty environment.
To prolong the service life of battery pack:
1) Store the battery pack below 26 °C after
charging it to 30%-50%.
2) Charge the battery pack fully once in less
than 6 months.
DISPOSAL OF DISCARDED BATTERY
PACK
To protect the natural environment,
please recycle or dispose of the
battery pack properly. The battery pack
contains a Li-ion battery. Please consult
the local waste disposal department
for the information on recycling and/or
disposal. Exhaust the battery pack with
the hand drill, remove the battery pack,
and wrap the pole port with strong tape
to avoid the short circuit and leakage.
Do not attempt to open or remove any
part.
Disposal of waste
The damaged machine, accessories
and packaging materials shall be
classified in detail for recycling in
line with environmental protection
requirements.
All plastic parts are marked with
material identifications to facilitate
the classification and recycling.