Sase PDG 5000, Manual

Page: 56 / 61

FAULT CODE DRIVE DISPLAY DERSCRIPTION
0 - No fault
16 E.OC1 Overcurrent trip during acceleration
17 E.OC2 Overcurrent trip during constant speed
18 E.OC3 Overcurrent trip during deceleration or stop
32 E.OV1 Regenerative overvoltage trip during acceleration
33 E.OV2 Regenerative overvoltage trip during constant speed
34 E.OV3 Regenerative overvoltage trip during deceleration or stop
48 E.THT Inverter overload trip (electronic thermal relay function)
49 E.THM Motor overload trip (electronic thermal relay function)
64 E.FIN Fin overheat
82 E.ILF Input phase loss
96 E.OLT Stall prevention
112 E.BE Brake transistor alarm detection
128 E.GF Output side earth (ground) fault overcurrent at start
129 E.LF Output phase loss
144 E.OHT External thermal relay operation
145 E.PTC PTC thermistor operation
176 E.PE Parameter storage device fault (control circuit board)
177 E.PUE PU disconnection
178 E.RET Retry count excess
192 E.CPU CPU fault
196 E.CDO Output current detection value exceeded
197 E.IOH Inrush current limit circuit fault
199 E.AIE Analog input fault
201 E.SAF Safety circuit fault
Display Screen Error Code Index
Rev 7