Sase PDG 5000, Manual

Page: 27 / 61

Item No. Part No. Description Quantity
1
PDG.50022.00 Top Plate 1
2
PDG.4A004.00 Steel PTO Assembled 1
3 PDG.4A003.00
Top Tightener Assembled 1
4 PDG.45030.00 Top Tightener Actuator 1
5 PDG.4A002.00 Top Idler Assembled 1
6 PDG.4A001.00 Drum Sheave Assembled 1
7 PDG.45058.00 Tightener Clamp 3
8 NB.12.108
M6-1.0x12 Socket Head Cap Screw 3
9 PDG.50036.00
Upper Counter Weight Half Moon 1
10 NB.25.101 M10 Out/M6 In, Threaded Insert (Required in aluminum Top Plate) 0
11 NB.13.115 M6-1.0x16 Flat Countersunk Head Screw 13
12 NB.13.218 M8-1.25x20 Flat Countersunk Head Screw 2
13 NB.10.218 M8-1.25x20 Socket Head Cap Screw 2
8
NB.12.108 Red LocTite 263
3
10
NB.25.101 Red LocTite 263 0
11
NB.13.115 Red LocTite 263 13
12
NB.13.218 Red LocTite 263
2
13
NB.10.218 Red LocTite 263
2
Top Drum
Top Drum Supplemental
Start with #1, Insert #5, Bolt down with #12, then remove the sheave from #5. Insert #2, bolt down with #11. Insert #3, Insert #7, bolt
down with #8. replace the sheave to #5. Insert #4, bolt down with #12.
Now CHECK the height of #3 and #5. If they are even, go on. If they are uneven, Insert NB.31.101 spacer to level them. The rest of the
parts can be added once #3 and #5 are in place and even at the top edge.