6
Getting Started
Unpacking the Equipment
§
After unpacking the equipment, check it immedi-
ately for any visible sign of damage resulting
from rough handling during shipment.
$
If any sign of damage is visible, refer to the
section entitled “Safety Inspection” in the chapter
entitled “Care and Maintenance.” It is a good
idea to save the box and all parts of the packaging
until you have successfully installed the equip-
ment. Only the original packaging provides the
best protection for shipment. Before packing the
equipment for shipment, unplug all connected
cables to prevent damage.
Equipment Supplied
The TopMix paint-mixing weighing system
includes the following components:
– Terminal (TM01-X) with LC display and keypad
for use in Zone 1 hazardous areas
– Ex-link box (YCO09-Z) for use outside the haz-
ardous area
– TopMix—Ex-link cable, part no. YCC01-
0038M20, for connecting the terminal (TM01-X)
to the Ex-link box. Cable length: 20 m.
– TopMix–VGA video cable, part no. YCC01-
0037M20, for connecting the display and control
unit to the Ex-link box. Cable length: 20 m.
– PC video cable, part no. YCC01-0039M3, for
connecting a standard computer to the Ex-link
box outside the hazardous area. Cable length: 3 m
– TopMix—PC USB cable, part no. YCC01-0040M3,
for connecting a standard computer to the Ex-
link box outside the hazardous area. Cable
length: 3 m
– TopMix—PMA series cable, part no. YCC01-
0041M3, for connecting a weighing instrument.
Cable length: 3 m
– Dust cover, part no. YDC01TM, for the display
and control unit
– Power cord for the Ex-link box
– Installation instructions (this manual)