13
Operation
The weight display shows the following special messages
for your information:
BUSY
The balance processor is still busy processing a function and
will not accept any other commands to perform functions at this
time.
STANDBY
The balance has been turned off with the ON/OFF key
(15)
and
is now in the STANDBY mode and ready to operate without
warmup.
POWER OFF
The balance was disconnected from line power (reconnection to
line power after the balance was unplugged, power failure or
outage).
CAL
The calibration function has been activated.
In addition to grams, this balance gives you a variety of
other menu-definable international weight unit options.
Select the menu code for the particular unit of weight you need
from the fable given for the balance operating program, and set
the appropriate code as described in the section "Balance Op-
erating Program."
Summary of Contents for Master series
Page 2: ...2 B 120S...
Page 3: ...3 B 310P B 310S...
Page 4: ...4 B 410 B 610 B 3100P B 3100S B 4100 B 6100...
Page 25: ......
