2
Contents
Warnings and
Safety Precautions
Contents . . . . . . . . . . . . . . . 2
Warnings and Safety Precautions .
2
Getting Started . . . . . . . . . . .
3
Operation
. . . . . . . . . . . . . . 7
Overview of Display
and Operating Elements . . . . . . . 7
Basic Weighing Function . . . . . . 8
Calibration/Adjustment . . . . . . . 9
Application Programs
. . . . . . . . 10
Net-Total Formulation/
Second Tare Memory . . . . . . . . 10
Counting . . . . . . . . . . . . . . . 11
Weighing in Percent . . . . . . . . . 12
Weigh Averaging . . . . . . . . . . . 13
Toggling Between Weight Units . . 14
Configuring the Balance (Menu Codes)
Setting the Parameters (Menu Codes) 15
Balance Operating Menu (Overview) 16
ISO/GLP-compliant Printout . . . . 18
Data Interface . . . . . . . . . . . . 20
Error Codes
. . . . . . . . . . . . . 21
Care and Maintenance
. . . . . . . 22
Instructions for Recycling
. . . . . 23
Overview
Specifications . . . . . . . . . . . . 24
Accessories (Options) . . . . . . . . 27
Declaration of Conformity . . . . . . 29
Safety
G
To prevent damage to the equipment,
please read these operating instructions
carefully before using your balance.
!
Do not use this balance in a hazardous
area/location.
!
Make absolutely sure to unplug the balance
from AC power before you connect or discon-
nect a peripheral device.
!
Exposure to excessive electromagnetic
disturbance can cause the readout value to
change. Once the disturbance has ceased, the
instrument can be used again in accordance
with its intended use.
Setting up the Balance
!
Warning when using pre-wired RS-232
connecting cables: The pin assignments
in RS-232 cables purchased from other
manufacturers may be incompatible with
Sartorius balances. Be sure to check
the pin assignment against the chart
on page 19 before connecting the cable,
and disconnect any lines that do not match.
– Connect only Sartorius accessories and
options, as these are optimally designed for
use with your Sartorius balance.
Do not try to solve any problems on your own.
The operator shall be responsible for any mod-
ifications to Sartorius equipment and for any
connections of cables or equipment not
supplied by Sartorius and must check and,
if necessary, correct these modifications and
connections. On request, Sartorius will provide
information on the minimum operating speci-
fications (in accordance with the standards
for defined immunity to interference).
– Do not open the balance housing.
If the seal is broken, this will result
in forfeiture of all claims under the
manufacturer’s warranty.
Summary of Contents for M-Power AZ124
Page 29: ...29...
