12
Weighing in Percent
Purpose
This application program allows you to
obtain weight readouts in percent which are
in proportion to a reference weight.
Preparation
G
Configure the Weighing in Percent applica-
tion in the operating menu:
See “Configuring the Balance.”
Menu code:
2. 1. 5
$
Reference percentage:
Code
3. 3. 1
5 %
Code
3. 3. 2
10 % (factory setting)
Code
3. 3. 3
20 %
Code
3. 3. 4
50 %
Code
3. 3. 5
100 %
$
Storage parameter
(display accuracy for counting)
Code
3. 4. 1
Standard resolution: With
stability (factory setting)
Code
3. 4. 2
With 10 times higher
stability than standard
See also “Configuring the Balance”
Example
Determine an unknown percentage: store the weight on the balance as a reference percentage
Menu: Application program: Weighing in Percent (menu code
2. 1. 5
)
Menu: Reference percentage: 100 % (menu code
3. 3. 5
)
Step
Key (or instruction)
Display/Printout
1. Tare the balance
t
0.0
g
2. Display the reference percentage:
v
>2 sec.
ref100
3. Place the reference weight for 100 %
+
222.5
g
on the balance (here: 222.5 g)
4. Start the application; if the print
v
+
100.00
%
format is set to include data
ID codes the following is printed
Wxx% + 222.500 g
5. Place an unknown weight
+
144.94
%
on the balance (here: 322.5 g)
6. Display weight
v
+
322.5
g
7. Display percentage
v
+
144.94
%
8. Unload the balance
0.00
%
9. Delete the reference percentage
c
10. Repeat the procedure starting from step 5, if desired.
Summary of Contents for M-Power AZ124
Page 29: ...29...
