background image

15

Declarations of Conformity

The 

C

 marking may be affixed only  

to equipment that complies with the  

following Directives (below). Conformity 

has been tested in conjunction with  

Sartorius equipment:

Council Directive 89/336/EEC  

“Electromagnetic compatibility (EMC)” 

as amended by 93/68/EEC

Applicable European Standards:

  1.1   Reference to 89/336/EEC:  

Official Journal of the European 

Communities, No. 2001/C105/03 

 

EN 61326-1 

 Electrical equip-

ment for meas-

urement, control 

and laboratory 

use EMC require-

ments 

   

Part 1: 

 General requirements  

Defined immunity  

to interference: 

Industrial areas, conti-

nuous, un-monitored 

operation  

Limitation of emis-

sions: 

Residential areas,

   

IF.... 

Class A

Note:

The operator shall be responsible for  

any modifications to the indicator and 

for any connections of cables or equip-

ment not supplied by Sartorius.  

On request, Sartorius will provide  

information on the minimum operat-

ing specifications (in accordance with 

the Standards listed above for defined 

immunity to interference).

73/23/EEC “Electrical equipment 

designed for use within certain voltage 

limits” as amended by 93/68/EEC

Applicable European Standards:

EN 60950   Safety of information  

technology equipment 

including electrical business 

equipment 

EN 61010   Safety requirements for 

electrical equipment for 

measurement, control  

and laboratory use 

Part 1: 

General requirements 

“EC Verification” –  

A Service Offered by Sartorius

Our service technicians authorized to 

perform the verification of your weigh-

ing instruments that are acceptable  

for legal metrological verification can 

inspect and verify the metrological 

specifications at the place of installa-

tion within the Member States of the 

European Union and the Signatories  

of the Agreement on the European  

Economic Area.

Subsequent Verifications within the 

European Countries

The validity of the verification will 

become void in accordance with the 

national regulations of the country in 

which the weighing instrument is used. 

For information on verification and 

legal regulations currently applicable in 

your country, and to obtain the names 

of the persons to contact, please con-

tact your local Sartorius office, dealer  

or service center.

Summary of Contents for IF CE Series






























Reviews: