Practical Example
When weighing in formulation components, the second component is over-poured.
Settings (changes in the factory settings required for this example):
Setup: Application parameters: Application 1: Recalculation
Step
Key (or instruction)
Display/Output
1. Delete previously stored values,
c
if necessary
2. Place container for filling
Place empty container
components on the scale
on the scale
3. Tare
t
4. Add the first component
Weigh the first component
into the container
5. Store component
Press the
Comp.1
Comp1 +
25.08 g
6. Add the second component
Weigh the second
component into the container
7. Start recalculation, because
Recalc
soft key
10.73 g were poured rather
than 10.60 g
8. Either press the minus
Minus
soft key repeatedly
key to correct the value …
67
