Sartorius combics 1, Operating Instructions Manual

Page: 2 / 121

Combics 1, Combics 1 plus and
Combics 2 are rugged display and
control units for the complex quality
control tasks you perform every day.
They meet the highest requirements
placed on the accuracy and reliability
of weighing results:
– in the food industry
– in the pharmaceutical industry
– in the chemical industry
– in the electronics and metal-working
industries
Combics indicators are:
– Rugged and durable
(stainless steel housing)
– Easy to clean and disinfect
– Easy to operate, thanks to the following
features:
– large, backlit display segments
– large keys with positive click action
– Independent of the weighing
instrument location
– Equipped with a range of interfaces
for flexible use
– Password-protected from unauthorized
changes in parameters (optional)
Combics 1 plus speeds up your routine
procedures with:
– Input functions for tare values
through numeric keypad
– Option for 2 alphanumeric lines
to identify samples
– Connectivity for bar code scanner
to enter tare values or ID codes
Combics 2 indicators have the following
features:
– Built-in application programs:
– Counting
– Neutral measurement
– Weighing in percent
– Averaging
– Checkweighing
– Classification
– Net-total formulation
– Totalizing
– Automatic initialization when you
switch on the Combics
– Automatic taring when a load is placed
on the weighing instrument
– Optional remote control using an
external computer
Symbols
The following symbols are used in
these instructions:
§
indicates required steps
$
describes what happens after you
have performed a certain step
!
indicates a hazard
Hotline:
For advice on the use of these
applictions, just call or fax your local
Sartorius office. For the address, please
visit our Internet website at:
www.sartorius.com
2
Intended Use