![Sartorius BioPAT Xgas Operating Instructions Manual Download Page 22](http://html1.mh-extra.com/html/sartorius/biopat-xgas/biopat-xgas_operating-instructions-manual_1199613022.webp)
22
Operating Instructions BioPAT
®
Xgas
Installation
Connecting to Biostat
®
B (Serial No. > 1000)
t
Connect the analog signal outputs of the
BioPAT
®
Xgas to the analog inputs on the
control tower of the Biostat
®
B as follows:
t
Take the analog signal cable.
t
Connect the cable plug labeled “Xgas” to
the right-hand socket of the BioPAT
®
Xgas.
t
Connect the cable plug labeled “Ext. Sig.
A1/B1” or “Ext. Sig.C1/D1” to the “Ext.
Sig.-A1/B1” or “Ext. Sig.-C1/D1” socket of
the Biostat
®
B depending on the DCU
signal configuration for off-gas analysis.