all emergency calls over FXO line where as Call ID detection feature is only needed when
the service is activated from the service provider side.
Next change Telephone numbers(s) to route field to (.*) for all FXO ports or as shown
below. Add the DID numbers provided by fixed line provider under DID to Forward to SIP
and make sure the numbers under DID to Forward section matches the inbound numbers
created on Sark in step 2.
Finally select the
New Install ?
Check box and press the Submit button. Wait couple of
seconds and press the Reboot system button when it appears.
Now you should be able to make/receive calls from and to Vega/SARK PBX.
