Document 630-881
Revised 09/17/2021
Copyright
©
2021, Sargent & Greenleaf
6/7
Re-install panic bar assembly and secure
with (2) #10-32 x 1/2" screws.
Secure panic bar channel
bracket to door with (2)
architectural bolts #10-24 x 1".
X
1
64
65
Remove panic bar assembly.
Drill (2) mounting holes Ø3/8"
through door, as marked.
Mark panic bar
channel bracket hole
locations.
62
63
W
3
Verify that interior center cover and panic
mechanism shim are oriented correctly. If
not, remove screws, rotate, and re-install.
Align panic mechanism shim to interior center
cover.
Align interior center cover
assembly to mechanical assembly.
V
Q
U
V
Q
V
Q
T
U
Q
T
V
1
Q
2
Q
3
Z
Z
1
S
1
66
Insert short spindle.
67
70
71
Install endcap.
72
Install interior center cover assembly. Ensure that the exit module
engages the spindle and panic mechanism. Secure with (2) #10-32 x
1/4" pan head screws and (3) #10-32 x 1/4" flathead screws.
Align panic mechanism to panic
mechanism shim.
Secure panic mechanism shim and
panic mechanism to interior center
cover using (4) #10-32 x 1/2"
flat
head screws.
Cam lock must be in the unsecured position.
Secure endcap to panic bar
channel bracket using (2) #10-24
x 3/8"
flat head screws.
Install panic mecha-
nism cover.
Secure panic mechanism cover to
panic mechanism using (2) #8-32 x 1/2"
screws and star washers.
68
69
73
74
75
OR
S
