18
Conquest Spas
OWNER'S MANUAL
CONTENDER & CHALLENGER SERIES
OPERATING THE HYDRO PUMP(S)/JET BUTTON(S)
(Majesty SE • Conqueror SE)
Activate the hydro jet pump(s) for maximum hydrotherapy jet action . Press the “Jets1” button once
for low speed, twice for high speed and a third time to turn the pump off . “Jets2” operates the Turbo
Boost Pump feature when activated with the "Jets1" Pump . The Turbo Boost Feature forces more air
into the jet plumbing lines giving added hydrotherapy performance and intensity through the jetting
in the spa ."Jets2" Button operates as an off/on option . Press once and it is on, press again and it is off .
If either pump is left running, they will turn off automatically in 15 minutes if on High speed or 30
minutes if on Low Speed .
Also, note, if your spa is in READY MODE, pump 1 low speed may turn on for at least 1 minute
every 30 minutes to detect the spa temperature (polling) and then to heat to the set temperature if
needed . When low speed turns on automatically, it cannot be deactivated from the panel; however,
the high speed may be started by pressing the “Jets1” button .
OPERATING THE HYDRO PUMP(S)/JET BUTTON(S)
(Grandeur • Celebration • Valiant • Concourse)
Activate the hydro jet pump(s) for maximum hydrotherapy jet action . Press the “Jets1” button once
for low speed, twice for high speed and a third time to turn the pump off . “Jets2” operates the Turbo
Boost Pump feature when activated with the "Jets1" Pump . The Turbo Boost Feature forces more air
into the jet plumbing lines giving added hydrotherapy performance and intensity through the jetting
in the spa . "Jets2" Button operates as an off/on option . Press once and it is on, press again and it is
off .
NOTE:
The Turbo Boost is not designed as a stand-alone therapy option and will produce very little
performance through the jetting without "Jets1" operating simultaneously with it .
19
Conquest Spas
OWNER'S MANUAL
VICTORY & CHALLENGER SERIES
OPERATING THE HYDRO PUMP(S)/JET BUTTON(S)
(Conqueror LE • Majesty LE • Realm • Laurel • Elation • Baroque)
Jets 1 Button
Activates the hydro jet pump #1 for maximum hydrotherapy jet action. Press the
Jets 1
button once for low speed, again for high speed and again to turn the pump off. When the
pump is activated the indicator above the
Jets 1
button will light up. The pump will turn off
automatically after 15 minutes on high speed and 4 hours on low speed.
Jets 2 Button
Activates the hydro jet pump #2 for maximum hydrotherapy jet action. Press the
Jets 2
button
once for high speed and again to turn the pump off. When the pump is activated the indicator
above the
Jets 2
button will light up. The pump will turn off automatically after 15 minutes on
high speed.
Jets 3 Button
Activates the hydro jet pump #3 for maximum hydrotherapy jet action. Press the
Jets 3
button
once for high speed and again to turn the pump off. When the pump is activated the indicator
above the Jets 3 button will light up. The pump will turn off automatically after 15 minutes on
high speed.
Note:
The spa light will begin flashing 15 seconds before the pumps shut off as a reminder,
that the pump(s) cycle is about to end.
Note:
Conquest Spa models are designed for maximum heat retention. The unit is not designed
to cool water. If the set or desired temperature is below that of the ambient temperature, the
unit will not be able to achieve this demand. Depending on the desired temperature, it may be
necessary to add cool water to the unit to lower your spas water temperature.
