60
O
Operations Trouble Shooting Guide
Problem
Probable Cause
Solutions
Spa is
• Power failure
• Check power source
not operating
• GFCI breaker tripped
• Try resetting GFCI breaker. If
breaker continues to trip, contact
your dealer.
• Heater Hi-Limit tripped
• Check for dirty filters.
Check to see if circulation pump
is air locked.
Spa is
• Dirty filters
• Clean the filters
not heating
• Temperature setting too low
• Increase the set temperature
• Pressure switch out of calibration
• Contact your dealer
• Air trapped in circulation line
• Using a garden hose, force water
through Whisper Clean® cartridge
opening or loosen the bottom
heater union to allow trapped air
to escape.
Poor or no
• Dirty filters
• Clean the filters
water flowing
through the jets
• Inadequate water level
• Fill spa to 2" above filters
• Air lock
• Prime the pump(s) by loosening
unions on the pump(s) until air
can be heard escaping, then
tighten unions.
Spa light out
• Burned out bulb
• Replace bulb
• Light not turned on
• Press the light key to
desired intensity
Pump(s)
• Automatic 15 minute shut off
• Press jets button again to start
turn off
another 15 minute cycle
unexpectedly
• Pump(s) may have overheated.
• Let pump sit for about 10-15
Built in protective overheat
minutes.Allow pump to cool
shut off
down, keep vented areas on access
panel free from blockage.