9
IR Match:
Set to match with the receiver. The screen
will display "Matching" when in process. After
successful matching, it will read "Match success."
Set Backlight:
Select ON or Delay by 10, 30, or
60 seconds. The default is "Delay 30s."
Restore default setting
UwMic9S-TX9S Version
Operation Guide
1. Connect the receiver to the microphone
input of a camera, camcorder or mixer with the
supplied cable.
2. Turn on the receiver by long pressing the
power button.
3. Set the channel of the receiver in two ways:
By using the auto scan function
Using the + or – button to display the auto scan
screen on the receiver.
Long press the SET button to select "Auto scan?"
Press the SET button to confirm.
A
B
The channel with the least noise and interference
will be displayed.
A. Indicates that the current channel with the
least noise is CH 08 and asks you if you would
like to use it. You can short press the SET button
to confirm the channel within 20 seconds or long
press the SET button to exit the displayed menu
without saving.
B. 20 second Countdown
