_
English
_
DEEP FRYER
Z-1980-AD
INSTRUCTION MANUAL
SAFETY INSTRUCTIONS - GENERAL
•
Please read these instructions carefully and retain them for future reference.
•
Use this appliance solely in accordance with these instructions.
•
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
•
Children should be supervised to ensure that they do not play with the appliance.
•
Have any repairs carried out solely by a qualified electrician. Never try to repair the
appliance yourself.
SAFETY INSTRUCTIONS - ELECTRICITY AND HEAT
•
Verify that the mains voltage is the same as that indicated on the type plate on the
appliance before use.
•
Always plug the appliance into an earthed wall socket.
•
Always remove the plug from the wall socket when the appliance is not in use.
•
Always remove the plug from the wall socket by pulling on the plug, not the power cord.
•
Regularly check the appliance power cord to make sure it is not damaged. Do not use the
appliance if the power cord is damaged. Have a damaged power cord replaced by a
qualified service department.
•
The appliance is fitted with a short power cord to reduce the risk that you become
entangled in the loose cord and, in so doing, cause the deep fryer to topple and splash you
with hot frying oil.
•
Do not use an extension lead.
•
Certain parts of the appliance can become hot; do not touch them, as you could burn
yourself.
•
The appliance needs space to allow heat to escape, thereby avoiding the risk of fire. Make
sure that the appliance has sufficient space around it, and does not come in contact with
flammable materials.
•
The appliance must not be covered.
•
Never use the appliance in the vicinity of flammable materials.
•
Make sure that the appliance, the power cord or the plug do not come into contact with
heat sources, such as a hot hob or open flame.
•
Make sure that the housing, the power cord and plug do not come in contact with water.
