_
English
_
In case of any faults do not use the appliance until it has been repaired by an expert.
•
Only use the original accessories.
•
Always remove the plug from the main power supply before fitting or removing any accessory
parts.
•
In order to avoid an electric shock never immerse the power supply cable, plug or any other
parts of the appliance in water or any other fluid.
•
If the supply cord is damaged, it must be replaced by the manufacture, its service agent or
similarly qualified person in order to avoid a hazard
•
ONLY use the appliance for the purpose intended.
•
Only use the appliance once it has been completely assembled and is ready for use!
•
NEVER immerse appliance parts in water.
•
NEVER use the appliance close to water.
•
NEVER clean the appliance using a sourcing pad or abrasive cloth.
•
DO NOT use cleaning brushes or abrasive agents.
•
Do not crush or bend the cable, or place it on hot surfaces.
•
Never cover the air vents as this may lead to overheating. Danger of fire!
•
This vacuum cleaner has a thermal cut out that protects the cleaner from overheating. If the
cleaner suddenly stops, switch off and unplug from the main socket. Check the cleaner for a
possible source of overheating such as a full bag, a blocked hose or filter. If these conditions are
found, fix them and wait at least 30 minutes before attempting to use the cleaner. After this time
plug the cleaner back in and turn on the switch.
•
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
•
Children should be supervised to ensure that they do not play with the appliance.
