_
English
_
during the winding process. Press down on the cable rewind button with the foot until the cable
has rewound completely onto the cable drum, which is inside of the cyclone vacuum cleaner.
•
In order to place the device in its parking position, shorten the telescopic tube to the storage
mode and use the hook located above the floor nozzle to guide it into the vacuum cleaner nozzle
holder.
Attention:
The device must only be used with the filter and exhaust filter in place.
Warning:
This product is designed with a Dust-full LED indicator, when the indicator is on, it is
reminding you to clean the suction system:
•
Check if the intake is suffocated.
•
Check if the dust tank or bag is full.
•
Check if HEPA filters or bag need cleaning or replace.
Always unplug the appliance before emptying the dust receiver
tank!
EMPTYING THE DUST TANK:
•
Open the front lid and take out the dust tank.
•
Release the dirt from the bottom plate.
•
Clean filters if necessary.
Note:
•
Clean the HEPA filter thoroughly. Never clean the HEPA filter using soap or any other
cleaning fluid. This would destroy the filter!
•
If the HEPA filter is heavily soiled, and this is leading to a reduction in suction power, it is
recommended that the filter be replaced with a new one.
•
Once cleaning is complete, replace the filter by simply reversing the process outlined above.
CLEANING THE DUST BAG SYSTEM
Cleaning the dust bag
