_
English
_
FAULT ANALYSIS AND TROUBLESHOOTING
Fault
Possible cause
Elimination
Unable to start
switch, product
fails to work.
1. Improper installation of central ring.
2. Head cover installed in wrong place.
1. Install central seat in proper place.
2. Install head cover in place.
Electric motor
smells bad at
first few times.
It is normal.
Please send the product to our
company’s maintenance point
nearby if the product still gives off
unpleasant smell after repeated use.
Halting when in
service.
1. Under voltage.
2. Excessive ingredients.
3. Push the rod with excessive force.
4. Motor thermal control protection.
1. Check if under voltage.
2. Disconnect power, take out the
surplus ingredients.
3. Push the rod gently.
4. Restart it after 20-30 minutes.
A lot of pulp
contained in the
juice.
1. Juice extraction net is damaged.
2. Too much pulp in the central ring.
1. Replace the net.
2. Clean the central ring.
Abnormal
vibration or big
noise.
1. Improper installation of juice
extraction net and poor running balance.
2. Unstable placement of product or
come off of foot pad.
3. Over voltage.
4. Excessive ingredients.
1. Install juice extraction net in
proper place.
2. Ensure the product is stable or
install the foot pad in proper place.
3. Check if any over voltage.
4. Disconnect power and take out
surplus ingredients.
Low quantity of
juice.
1. A lot of pulp in the central ring.
2. Press the push rod with excessive
force.
1. Clean the central ring.
2. Press the push rod with proper
force.
Cutter
Cutter twined by ingredients or blocked.
Disconnect power, take out
ingredients.
